When your patients need implant restorations, precision matters. Screw retained implant crowns offer a highly reliable, retrievable solution that many dentists prefer over cement-retained alternatives. They eliminate the risk of residual cement in the sulcus and allow for easy access if adjustments are ever needed.
At Dentek Digital, we fabricate screw retained implant crowns using advanced CAD/CAM technology. Our digital workflow helps dentists across Phoenix, Scottsdale, Mesa, and beyond deliver consistent, high-quality results to their patients. Additionally, we now serve dental professionals in Boulder City, NV, and surrounding areas.
Therefore, if you are a dentist looking for a trusted digital lab partner, this guide is for you. We will walk you through everything you need to know about screw retained implant crowns and how our process supports your practice.
What Are Screw Retained Implant Crowns?
Screw retained implant crowns are prosthetic crowns that attach directly to the implant fixture or abutment using a small screw. Unlike cement-retained crowns, they do not rely on dental cement for retention. As a result, they are fully retrievable and easier to service over time.
Furthermore, this design gives the dentist direct access to the implant interface. This makes hygiene maintenance and future adjustments far more straightforward. Many clinicians consider screw retention the gold standard for single-unit and multi-unit implant cases.
How Do They Differ from Cement-Retained Crowns?
Cement-retained crowns use dental cement to bond the restoration to a separate abutment. On the other hand, screw retained crowns thread directly into position. This eliminates the possibility of excess cement migrating below the gumline, which can cause inflammation or implant failure.
Moreover, screw retained designs allow for clean removal when a patient needs a repair, an adjustment, or a full prosthetic replacement. This is a significant clinical advantage over the long term. Many dentists in the Phoenix metro area, including those in Chandler and Gilbert, have made the switch for this reason.
When Is Screw Retention the Right Choice?
Screw retention works well in most anterior and posterior implant cases. However, implant angulation plays a key role. Ideally, the implant should be placed within a range that allows the screw access hole to exit through the occlusal or lingual surface.
Additionally, screw retained crowns are especially beneficial in cases where retrievability is a priority. For example, patients who may need future prosthetic modifications are excellent candidates. Our team at Dentek Digital can help you evaluate the best solution for each unique case.
The CAD/CAM Advantage in Implant Crown Fabrication
Digital technology has transformed how dental labs fabricate implant restorations. At Dentek Digital, we were among the earliest adopters of CAD/CAM workflows in the country. Because of this, we bring a high level of experience and precision to every restoration we produce.
Our digital process starts with a scan. We accept digital impressions from most intraoral scanning systems. Next, our technicians design the crown using sophisticated CAD software. Finally, we mill or print the restoration from premium materials with exceptional accuracy.
Precision Milling and Design
Each screw retained implant crown we fabricate is designed to meet the exact specifications of your case. We work with a wide range of implant systems and can accommodate most major platforms. Furthermore, our milling equipment produces restorations with tight tolerances and excellent marginal fit.
This level of precision reduces chairside adjustments for you and improves comfort for your patient. Additionally, our restorations are fabricated from high-quality materials, including zirconia, to ensure long-term durability and aesthetics.
Digital Impressions Streamline Your Workflow
Sending digital scans instead of traditional PVS impressions saves time for your team. There is no waiting for impressions to set, no risk of distortion during shipping, and no need to pour physical models. As a result, turnaround times are faster and case communication is cleaner.
Dentists in Tempe and Scottsdale have found that switching to a fully digital workflow significantly reduces case revisions. Moreover, digital files are easy to store and reference if a patient returns for future treatment. We make this transition simple for practices of all sizes.
Why Dentists in Boulder City, NV Choose Dentek Digital
Boulder City, NV is a close-knit community with a growing patient base. Dentists there need a reliable lab partner who can deliver consistent quality on every case. Therefore, many Boulder City practices turn to Dentek Digital for their implant restoration needs.
We offer a streamlined case submission process that works for practices regardless of location. You can submit your digital scans online, communicate directly with our team, and receive finished restorations shipped directly to your office. In addition, our technicians are available to consult on complex cases before you finalize your treatment plan.
Fast Turnaround Without Sacrificing Quality
We understand that your schedule depends on reliable turnaround times. Because of this, we prioritize efficient production without cutting corners on quality. Our CAD/CAM workflow allows us to produce precise restorations in a fraction of the time required by traditional lab methods.
Furthermore, we communicate proactively about case status. If we have a question about your case, we reach out right away. This keeps your appointments on track and your patients satisfied.
A Trusted Partner for Implant Cases
At Dentek Digital, we do not just fabricate restorations. We act as a true clinical partner for the dental practices we serve. Our technicians bring deep expertise in implant prosthetics, and we welcome collaboration at every stage of the case.
Additionally, we serve a broad network of dentists across the Phoenix metro area, including practices in Mesa, Chandler, Gilbert, and Scottsdale. That same commitment to quality and service extends to our partners in Boulder City and throughout Nevada.
Materials We Use for Screw Retained Implant Crowns
Material selection plays a critical role in the long-term success of an implant crown. We offer several high-quality options depending on the clinical requirements of each case. Our team can help you choose the right material based on location, occlusal load, and aesthetic goals.
Zirconia
Zirconia is one of the most popular materials for screw retained implant crowns. It is extremely durable and offers excellent biocompatibility. Furthermore, full-contour zirconia restorations provide good aesthetics, especially in posterior regions where strength is the priority.
We also offer layered zirconia options for cases where anterior aesthetics are critical. These restorations combine the strength of a zirconia substructure with the natural appearance of feldspathic porcelain. As a result, you can achieve both function and beauty in a single restoration.
Porcelain-Fused-to-Metal and Other Options
In some cases, porcelain-fused-to-metal restorations remain a reliable choice. We continue to offer this material alongside more modern alternatives. Additionally, we fabricate titanium-based components for implant cases that require a metal-on-metal interface at the implant level.
Our goal is always to match the material to the patient’s needs. Therefore, we encourage open dialogue with your team before finalizing material selection.
How to Send a Case to Dentek Digital
Getting started is simple. First, capture a high-quality intraoral scan using your preferred scanning system. Include all necessary components: the implant scan body, opposing arch, and bite registration. Then, submit your case through our online portal or contact our team directly.
Next, our technicians review your case files and reach out if any clarification is needed. We confirm turnaround time and keep you updated throughout production. Finally, your finished restoration ships directly to your practice, ready for delivery.
We have refined this process to be as smooth as possible for busy dental practices. Additionally, our team is always available to answer questions about case setup, material selection, or implant compatibility.
Frequently Asked Questions
What implant systems does Dentek Digital support?
We work with a wide range of implant platforms. Most major systems are supported through our digital workflow. Contact our team before submitting a case if you have questions about compatibility with a specific system.
Do I need a specific intraoral scanner to send digital scans?
We accept files from most major intraoral scanning systems. However, we recommend reaching out to confirm compatibility before your first submission. Our team is happy to guide you through the file format requirements.
How long does it take to receive a finished screw retained implant crown?
Turnaround times vary depending on the complexity of the case and the material selected. Generally, our CAD/CAM process is faster than traditional lab methods. Contact us for current production timelines when you submit your case.
Can Dentek Digital help with complex multi-unit implant cases?
Yes. In addition to single-unit crowns, we fabricate multi-unit implant restorations. Our technicians are experienced with full-arch cases and implant-supported bridges. We recommend consulting with our team early in your treatment planning process.
Is screw retention always the best option for implant crowns?
Screw retention is an excellent choice for most cases, but it is not the only option. The best approach depends on implant angulation, patient anatomy, and your clinical goals. We are happy to help you evaluate the right solution for each case.
Partner with Dentek Digital for Your Implant Restorations
Screw retained implant crowns require precision, quality materials, and an experienced lab team. At Dentek Digital, we bring all three together using an advanced CAD/CAM workflow built for today’s digital dental practices. Furthermore, we are committed to being a reliable partner for every case you send our way.
Whether you practice in Boulder City, NV, or anywhere across the Southwest, we are ready to support your implant restorations. Our team serves dental professionals in Phoenix, Scottsdale, Mesa, Chandler, Gilbert, Tempe, and beyond — and we are proud to extend that same level of service to dentists throughout Nevada.
Ready to get started? Contact Dentek Digital today to discuss your next implant case and discover how our digital lab can elevate the quality of your restorations.